General specifications

Model		P7000S	P5000S	P3500S	P2500S
Dynamic power; 1kHz; 20ms nonclip	2ohms; Stereo	1600Wx2	1300Wx2	1000Wx2	650Wx2
	4ohms; Bridge	3200W	2600W	2000W	1300W
Output power; 1kHz	4ohms; Stereo	1100Wx2	750Wx2	590Wx2	390Wx2
	8ohms; Stereo *:230V model	750Wx2 650Wx2*	525Wx2	390Wx2	275Wx2
	8ohms; Bridge	2200W	1500W	1180W	780W
Output power; 20Hz-20kHz	4ohms; Stereo	950Wx2	700Wx2	450Wx2	310Wx2
	8ohms; Stereo	700Wx2	500Wx2	350Wx2	250Wx2
	8ohms; Bridge	1900W	1400W	900W	620W
		P7000S	P5000S	P3500S	P2500S
Power bandwidth		10Hz-40kHz
Total harmonic distortion		Less than 0.1% (20Hz-20kHz; Halfpower)
Inter moduration distortion		Less than 0.1% (60Hz:7kHz=4:1, Half Power)
Frequency response		0, +0.5, -1dB; 20Hz-50kHz
S/N ratio		More than 104dB	More than 103dB	More than 102dB	More than 100dB
Residual output noise (DIN AUDIO)		Less than -70dBu
Crosstalk		Less than -70dB
Damping factor		More than 350		More than 200
Maximum voltage gain		32.1dB
Input sensitivity @8ohms		+8dB	+6dB	+4dB	+3dB
Processors		HPF/LPF (25Hz-150 sweepable, 12dB/Oct), YS Processing
I/O connectors	Line input / output ports	XLR3-31 type /ch(balance) TRS Phone /ch(unbalance)
	Speaker output ports	SPEAKON /ch 5-way binding post /ch Phone jack /ch(unbalance)
Protection circuit	Load protection	POWER switch ON/OFF mute; DC-fault (power supply shutdown)		POWER switch ON/OFF mute; DC detection
	Amplifier protection	Temp. detection (Heat sink temp ≥90°C), VI limiter (RL≤1ohm)
Amplifier class		EEEngine
Cooling		Dual variable-speed fan		Single variable-speed fan
Power requirements		AC120V, 230V or 240V 50/60Hz
Power consumption	Music source equivalent	650W	500W	450W	320W
	Idling	35W	35W	30W	25W
Dimensions	Width	480mm; 18-7/8"
	Height	88mm; 3-7/16"
	Depth	456mm; 17-15/16"
Net weight		12kg; 26.5lbs	12kg; 26.5lbs	15kg; 33.1lbs	14kg; 30.9lbs